Angebot!

KEIN 4-FAHRZEUG-MONTIERTER 12V 300BAR KOMPRESSOR

Bewertet mit 5.00 von 5, basierend auf 2 Kundenbewertungen
(2 Kundenrezensionen)

$400.00 $305.00

include shipping cost to all of world

Compare
Missbrauch melden

Missbrauch bezüglich Produkt melden KEIN 4-FAHRZEUG-MONTIERTER 12V 300BAR KOMPRESSOR

Kategorien: ,

Beschreibung

a:the battery can not be with the air transport recent,how to

install the  battery .Unscrew the all of  Screws please,then   put the battery in.IMG_20171122_091836IMG_20171122_091823

 

 

 

 

cooling fan into a built-in straight blown cylinder, while adding a fan straight blow motor. Better heat dissipation

increase the cylinder temperature display function, the machine running temperature at a glance. Cylinder super 95 degrees need to stop and rest.

increase the fan independent switch, a long time after the operation can be a single fan switch, cooling the machine cooling. So that the machine piston ring life longer.

Machine work video and technical parameters, please refer to the store four generations of machine description, upgraded version of the machine due to heat enhancement, when the air speed assembly time to adjust slightly faster than the four generations.

 

the air speed problem. Four generations of upgraded version of the reference time is 0.3 liters cylinders 0 to 250bar pressure need 11 minutes or so, 0 to 300bar pressure about 15 minutes or so, other capacity cylinders by volume ratio conversion. After all, the car machine only 300 watts only, like three or four minutes filled with only close to 2000 watts of home large machine. You get on the gas slowly score and what ratio, and then there are valves and other joints have no direct impact on the air pressure and not on the high pressure.

about 90 degrees temperature is the normal temperature of the machine work (the beginning of the work will quickly heat up to the normal range), as long as the thermometer shows no more than 95 degrees can work for a long time. The piston ring can withstand 280 degrees high temperature, safe working temperature only 35%, so do not worry about the temperature brought about by the shortening of life. This temperature is only the cylinder surface temperature, the middle through the high-pressure copper tube heat and high pressure hose and then to the cylinder, the heat has been dispersed more than 90%. A bottle of gas down the gas is only warm it, there is no high temperature to bring the cylinder safety risks.

Die Maschine kann problemlos bis 300 bar drucklos bis 400 bar unter Druck gesetzt werden. Die Ankunft der Testmaschine kann nicht bis 300 bar berechnet werden, Rückgabe oder Ersatzgeschäft tragen alle den Rundreiseversand. Etwas ist gut oder schlecht ist schlecht, wo man sich an Gut und Böse beteiligt, wenn es die Wahrheit ist.

TB2sxfFz5pnpuFjSZFIXXXh2VXa _ !! 74468359_TB2BxfFz5pnpuFjSZFIXXXh2VXa _ !! 74468359_TB2oh5avR4lpuFjy1zjXXcAKpXa _ !! 74468359_TB2sdC9t4RDOuFjSZFzXXcIipXa _ !! 74468359_

Vorwort:

Sie sind herzlich eingeladen, die Hochdruck-Schlauchpumpe des Unternehmens zu kaufen, eine Zusammenarbeit aller Freunde des Lebens

Die Erzeugung von Produkten auf der Basis der vorherigen Generation nach 8 Monaten Forschung und Entwicklung und Stabilitätsprüfung. Endlich erfolgreich, kein Wasser hinzuzufügen

füge kein Öl hinzu. Millionen U / min zum Turbo-Lüfter und gut gestalteten Ansaugkanal,

Zylinder 360 Grad rundum kühl, um die hohe Temperatur von 280 Grad Celsius Fluor-Kautschuk-Dichtungen und

Kolbenring. Lassen Sie die Maschine 30 Minuten ohne Ausfallzeiten arbeiten.

123 Klasse Zylinder Kolbenring alle tragen automatische Kompensation Design, um zu vermeiden

Traditionelle Wasserbetankung unter Verwendung von Gummi als Kolbenringmaschine, die einige Flaschen Gas auf den Reparaturbedarf füllt

und vermeiden Sie die Sicherheitsrisiken: Hochtemperatur-Öl- und Gasexplosion durch das Risiko einer Zylinderexplosion

Paketliste

Kompressor * 1

Batterieclip * 2 (rot und schwarz)

Tracheale Druckentlastungs – Hochdruckeinheit * 1

Manometer Direkter Verstopfungsstopfen * 1

Schnellstecker Stecker Dichtring * viele

Gebrauchsanweisung:

1 normale Arbeit erfordert 11,5-14V DC-Stromversorgung, 99% Geländefahrzeuge und Autos in diesem Bereich,

Die Spannung ist zu hoch oder zu niedrig, um das Gerät zu verbrennen

2 Das Gerät ist mit einem Netzkabel ausgestattet, um das Terminal zu entfernen. Rot Batterie anschließen +

black connect  battery-. Please connect correctly, otherwise the cooling fan will not work, resulting in the machine ultra-high temperature pull cylinder. Wiring is completed and the switch is activated to confirm that the fan is operating normally before starting work

3 Connect the high pressure trachea pressure ratio to the quick release port of the relief valve to the machine outlet. And tighten the pressure relief screw to start work.

4 The machine uses the piston ring wear automatic compensation function, each work has a short preheating process, can return to normal work. Each time you start work, you can use a random pressure gauge plug, a 0-200bar test to warm up, confirm the normal pressure on the machine, and then the cylinder inflatable work

5 The machine can not be continuous for more than 30 minutes, to avoid prolonged high load over work

6 The maximum punching of the machine can not exceed 300 bar. Overpressure can cause excessive wear. Recommended the use of 250bar, long-term experiments found that each inflated in the case of 250bar-300bar, the cylinder head check valve seal 3-5 times will be damaged

7 when inflatable finished,one step Deflation, two step remove inflatable head, to prevent the  O type rubber ring out of the plug, the head loss of sealing capacity

Note:

1 Please read the instructions before use

2 Please use the process of people on duty, abnormal circumstances, please immediately stop

3 machine used in the process of kaka sound, the higher the pressure this voice is more obvious. Is a normal phenomenon

4 working voltage of 11.5v-14v, continuous working hours not more than 30 minutes

5 use the temperature of more than 95 degrees Celsius need to stop compressor,just turn on fan,  only to take a break

6 fan does not run and the fan inlet is strictly blocked, 2 cases of continuous work will cause overheating

2 Bewertungen für KEIN 4-FAHRZEUG-MONTIERTER 12V 300BAR KOMPRESSOR

  1. Bewertet mit 5 von 5

    yesiam

    this little unit will give people a big Surprise than the big compressor even for anyone

  2. Bewertet mit 5 von 5

    tomianrauf

    Hi sir/madm
    I have purchased this 12volte compressor from pakistan. Aftet few days working compressor lost pressure. I asked mechanic to check and he told me that final stage seals are damaged. I asked my local dealer for that seals. He told me that he have not. So please help me from where i can get complete seals kit?any dealer or if you have ple tell me the procedure to buy. I will be very thankful to you.

Füge deine Bewertung hinzu
Entschuldige, es sind keine weiteren Angebote vorhanden